<<BACK

1/27 R/C EP TOURING CAR MINI-Z AWD MA-010

Mini-Z AWD MA010 Chassis Set


No.30560   Chassis Set

□Available : 1 Dec 2005

Speed and performance in the palm of your hand. Precision shaft-driven AWD chassis produces amazing road power.

Precision diff gears on front and rear on the shaft-driven AWD power train combine with the 4-wheel independent suspension for performance well beyond its size. The AWD (All-Wheel-Drive = 4WD) makes the MA-010 chassis the ultimate mini racing machine for both on-road and off-road surfaces. The fully assembled chassis is equipped with high performance receiver and digital servo, so simply attach your favorite body and hit the track! This set is packaged without transmitter making an ideal high-performance AWD addition to your MINI-Z garage.

Packed with precision high-performance features such as mid-ship motor mount, shaft-driven AWD and 4-wheel independent suspension.

 

All wheels equipped with metal shaft resin molded universal swing shafts. Reliably transfers drive power and realizes smooth suspension movement.

 

Specially shaped teeth on crown and pinion drives the propeller shaft in the 3 bevel gear diff gears.

Optional parts allow setting of toe-in angle on front and rear. Tie-rods can be attached / removed easily for excellent maintenance characteristics.

 

Drive a dropped-chassis by adjusting with the chassis height adjustment collars. The 4 different pinion gears produce a wide range of gear ratio settings with the 3 different spur gears.

 

Front features bump stop to avoid body contact with chassis and regulate suspension stroke.

◎Includes two sets of wheels with different width and offset.

 

 

  • Ultra-fine 1/100mm finish.
  • Attach / install the front diff unit with just 4 screws, or the rear diff unit with 6 screws.
  • 4-wheel independent suspension features coil spring king pin strut system.
  • Produces the controlled drift of high-performance AWD racing machines.
  • Only 5g heavier than the MR-02 chassis but with AWD and 4-wheel independent suspension.
  • Chassis design realizes a minimum width of 65mm, ideal for bodies suited to the 01 / 015 chassis.
  • Compatible with most bodies that fit the MINI-Z Racer M and L size wheelbases. (Some bodies may not be compatible).
  • Equipped with 4 ball bearings as standard.
<MINI-Z AWD and MINI-Z Racer Interchangeability>
Regarding Body Fitting
・The MINI-Z AWD chassis width is the same as the MINI-Z Racer MR-015.
 Most bodies for the M and L-size wheelbases of the MR-01 and MR-015 chassis are compatible with the AWD.
Regarding Wheels
・MINI-Z AWD features specially designed wheels. These wheels are not compatible with previous versions of the MINI-Z.
 Please select and use the wheels included in the chassis set.
Regarding the Auto Scale Collection
・Wheels included in the Auto Scale Collection are not compatible with the AWD.
 Use together with the wheels included in the AWD chassis set.
Regarding the Motor
・The wiring on the motor included on the MINI-Z AWD is different to other motors in the MINI-Z Racer Series.
 Please use the motor set specifically for the AWD.

< Chassis Set Contents >

  • Fully assembled chassis with R/C unit installed
  • Pinion Gears: 4 types, Spur Gears: 3 types (match to 3 wheelbase settings for total of 6)
  • 6 types of wheel setting combinations with different offset and widths - 14 wheels included (8.5mm wide tires x 4, 11mm wide tires x 2)
  • Ball bearings (4)
  • Chassis height adjustment collars
  • Wheel Wrench
  • Body Set, Transmitter, and batteries for chassis (4 x AAA-size alkaline or Ni-MH) are all sold separately
Chassis Technical data
Length
127.5mm(M)、131.5mm(L)
Width
65〜72mm (67mm)
Height
43mm
Ground Clearance
4mm
Wheelbase
90mm(M)、94mm(L)
Tread (F/R)
56.5〜63.5mm/56.5〜61mm (F/R 58.5mm)
Tire(F/R)
Φ 25×8.5mm 2pcs/Φ 25×11mm 2pcs (Φ 25×8.5mm 4pcs)
Gear Ratio
7,2/6.4/6.0/5.7/5.3/5.0/4.5:1
Weight
135g (approx.)
Motor
130-Class

* Values inside ( ) refer to Nissan Skyline GT-R R34 V-Spec II Nur.

□Last updated:30 Jul 2006

PAGE TOP